background image

26

GB

Problems and remedies (continued)

The sound skips.

• Wipe the CD clean (see page 29).

• Replace the CD.

• Try moving the system to a place without

vibration (e.g., on top of a stable stand).

• Try moving the speakers away from the system,

or placing them on separate stands.

• When you listen to a track with bass sounds at

high volume, the speaker vibration may cause the
sound to skip.

Play does not start from the first track.

• Press PLAY MODE/TUNING MODE in stop

mode repeatedly until “PGM” or “SHUFFLE”
disappears to return to normal play.

The disc tray does not open and “LOCKED”
appears.

• Contact your Sony dealer or local authorized

Sony service facility.

Tape Deck

The tape does not record.

• The tab has been removed from the cassette.

Cover the broken tab with adhesive tape (see
page 29).

• The tape has wound to the end.

The tape does not record or play, or there is a
decrease in sound level.

• The heads are dirty. Clean them.

• The record/playback heads are magnetized.

Demagnetize them (see page 29).

The tape does not erase completely.

• The record/playback heads are magnetized.

Demagnetize them (see page 29).

There is excessive wow or flutter, or the sound
drops out.

• The capstans in the tape deck are dirty. Clean

them using a cleaning cassette.

Noise increases or the high frequencies are
erased.

• The record/playback heads are magnetized.

Demagnetize them (see page 29).

Optional components

There is no sound.

• Refer to General item “There is no sound.” on

page 25 and check the condition of the system.

• Connect the component properly (see page 23)

while checking:

– if the cords are connected properly.

– if the cord plugs are firmly inserted all the way.

• Turn on the connected component.

• Refer to the operating instructions provided with

the connected component and start playing.

The sound is distorted.

• Set the volume of the connected component

lower.

Tuner

Severe hum or noise/stations cannot be
received.

• Set the proper band and frequency (see page 11).

• Connect the antenna properly (see page 6).

• Find a place and an orientation that provide good

reception, then set up the antenna again. If you
cannot obtain good reception, we recommend
you connect a commercially available external
antenna.

• The supplied FM lead antenna receives signals

along its entire length, so make sure you extend
it fully.

• Locate the antennas as far away from the speaker

cords as possible.

• Consult your nearest Sony dealer if the supplied

AM antenna has come off the plastic stand.

• Try turning off surrounding electrical equipment.

A stereo FM program cannot be received in
stereo.

• Press REPEAT/FM MODE until “STEREO

MODE” appears in the display.

• See “Severe hum or noise/stations cannot be

received.”, and check the antenna condition.

Summary of Contents for CHC-TB10

































Reviews: