![background image](http://html.mh-extra.com/html/sony/chc-cl5md/chc-cl5md_operating-instructions-manual_420249032.webp)
32
6
Turn
./>
(or press
.
or
>
on
the remote) to change the recorded
level.
The recording level can be changed from
–12 dB to +12 dB, in 2 dB steps. While
monitoring the sound, change to the
optimum level while making sure that
“OVER” does not appear in the display at
the loudest portion.
7
Press ENTER/YES.
“S.F Edit OK?” appears in the display.
8
Press ENTER/YES again.
The deck starts recording over the existing
track. “S.F Edit: ** %” appears while the
track is being recorded. An amount of time
that is roughly equal to or longer than the
playback time of the track is required when
recording over the track. When the
recording finishes, “Complete!” appears in
the display for a few seconds.
Changing the recorded
level after recording
— S.F Edit Function
You can change the volume of recorded tracks
using S.F (Scale Factor) Edit. The original
track is recorded over at the new recording
level. When changing the recording level, you
can select Fade-in Recording to gradually
increase the signal level at the start of
recording, or Fade-out Recording to gradually
decrease the signal level at the end of the
recording.
Changing the overall
recording level
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press MENU/NO to display “Edit
Menu”.
3
Turn
./>
(or press
.
or
>
on
the remote) until “S.F Edit?” appears,
then press ENTER/YES.
4
Turn
./>
(or press
.
or
>
on
the remote) until “Tr Level?” appears,
then press ENTER/YES.
5
Turn
./>
(or press
.
or
>
on
the remote) until the track number you
want to change the recording level
appears, then press ENTER/YES.
“Level 0dB” appears in the display.