9
CFD-G700CP/G770CP/G770CPK
CFD-G770CPK (1/2)
Basic Operations
* VOL + ( on the remote)
Ȳ
,
ā Ȱ
and
à Ȫ
(on the
unit) have a tactile dot.
Before using the unit
To turn on/off the power
Press POWER
ȩ
.
To adjust the volume
Press VOL +, – (, – on the remote)
Ȳ
.
To listen through headphones
Connect the headphones to the
(headphones) jack
ȼ
.
To select the sound characteristic
Press ROCK, DANCE, SALSA, REGGAETON or FLAT
Ȭ
to select the kind of audio emphasis that you want.
(On the remote, press SOUND
Ȭ
repeatedly.)
To reinforce the bass sound
Press POWER DRIVE WOOFER (WOOFER on
the remote)
ȸ
to select
or
on
the display.
is more effective. When the
WOOFER function works, the ring on the front panel
lights up.
To return to normal sound, press the button repeatedly
until the indication disappears from the display.
Notes
ˎ
While the sleeping timer is on, the ring does not light, even if the
WOOFER function is used.
ˎ
When you use the headphones, the WOOFER function does not
work.
Playing a CD/MP3 disc
1
Press
ì
PUSH OPEN/CLOSE
ȱ
on the unit, and
place a disc with the label side up on the CD
compartment.
To close the CD compartment, press
ì
PUSH OPEN/
CLOSE
ȱ
on the unit.
2
Press
ā
on the unit (
à
on the remote)
Ȱ
.
The unit plays all the tracks/MP3 files once.
When you place MP3 discs, “MP3” appears in the
display after the unit reads the file information.
Audio CD
Track number
Playing
time
MP3 disc
MP3 file number
After the song title is displayed,
the playing time* will appear.
* If the playing time is more than 100 minutes, it appears “--:--” in
the display.
To
Press
Pause playback
ā
on the unit (
ê
on the remote)
Ȱ
. To resume play, press it again.
Stop playback
Ą
Ȱ
.
Go to the next
track/MP3 file
Ñ
ȯ
.
Go back to the
previous track/
MP3 file
Ã
ȯ
.
Select a folder on
an MP3 disc
+ to go forward and – to go
backward
Ȯ
.
Locate a point
while listening to
the sound
Ñ
(forward) or
Ã
(backward)
ȯ
while playing and hold it until
you find the point. (
ù
or
ß
ɀ
on the remote)
Locate a point
while observing
the display
Ñ
(forward) or
Ã
(backward)
ȯ
in pause and hold it until you
find the point. (
ù
or
ß
ɀ
on
the remote)
Remove the CD
ì
PUSH OPEN/CLOSE
ȱ
.
Tips
ˎ
Playback starts from the track/MP3 file you last stopped playing
(Resume play). During stop, the track/MP3 file number to be played
is displayed.
ˎ
To cancel the resume play (to start play from the beginning of the
first track/MP3 file), press
Ą Ȱ
while the CD is stopped. When you
open the CD compartment or turn off the unit, the resume play is
also canceled.
Note
You cannot locate a specific track if “SHUF” or “PGM” is lit in the
display.
Press
Ą Ȱ
, and then press MODE
ȶ
repeatedly until “SHUF” and
“PGM” disappear from the display.
Example of folder structure and playing order
The playing order of the folders and files is as follows:
Folder
MP3 file
Notes on MP3 discs
ˎ
When the disc is inserted, the unit reads all the files on that disc.
During this time, “READING” is displayed. If there are many folders
or non-MP3 files on the disc, it may take a long time for play to
begin or for the next MP3 file to start play.
We recommend that you do not save unnecessary folders or files
other than MP3 ones in the disc to be used for MP3 listening.
ˎ
A folder that does not include an MP3 file is skipped.
ˎ
Maximum number of files: 255
Maximum number of folders: 150 (including the root folder)
Maximum number of folders and files in total: 256
Maximum directory levels: 8
ˎ
Folder names and file names can be displayed with up to 30
characters including quotation marks.
ˎ
The characters A - Z, 0 - 9, and _ can be displayed on this unit.
Other characters are displayed as “_”.
ˎ
This unit conforms to Version 1.0, 1.1, 2.2, 2.3 and 2.4 of the ID3 tag
format. When the file has the ID3 tag information, “song title”, “artist
name” and “album name” can be displayed. If the file does not have
the ID3 tag information, “NO TITLE” appears instead of song title,
“NO ARTIST” appears instead of artist name and “NO ALBUM”
appears instead of album name. The ID3 tag information can be
displayed with up to 15 characters.
ˎ
When naming, be sure to add the file extension “mp3” to the file
name.
ˎ
If you put the extension “mp3” to a file other than an MP3 file, the
unit cannot recognize the file properly and will generate random
noise that could damage your speakers.
ˎ
The file name does not correspond to the ID3 tag.
Listening to the radio
1
Press RADIO/BAND
ˎ
AUTO PRESET
ȭ
on the unit
(RADIO/BAND
ȭ
on the remote) repeatedly.
Each time you press the button, the indication changes
as follows:
“FM”
“AM”
2
Hold down
TUNE + or –
Ȯ
until the frequency
digits begin to change in the display.
The unit automatically scans the radio frequencies and
stops when it finds a clear station.
If you cannot tune in a station, press
TUNE
+ or –
Ȯ
repeatedly to change the frequency step by step.
When an FM stereo broadcast is received, “ST”
appears.
Tip
If the FM broadcast is noisy, press MODE
ȶ
until “Mono” appears in
the display and the radio will play in monaural.
Playing a tape
Use buttons on the unit for the operation.
1
Press
Ąì Ȫ
on the unit, and insert the tape into
the tape compartment with the side you want to
play facing upward. Use TYPE I (normal) tape only.
Close the compartment.
Make sure there is no slack in the tape to avoid
damaging the tape or the unit.
2
Press
à Ȫ
on the unit.
The unit starts playing.
To
Press
Pause playback
ê
Ȫ
on the unit. To resume play,
press it again.
Stop playback
Ąì Ȫ
on the unit.
Fast-forward or
rewind*
ù
or
ß
(rewind or fast
forward)
Ȫ
on the unit.
Eject the cassette
Ąì Ȫ
on the unit.
* When the tape is wound to the end, press
Ąì Ȫ
to release
ù
or
ß Ȫ
.
Recording on a tape
Use buttons on the unit for the operation.
1
Press
Ąì Ȫ
on the unit to open the tape
compartment and insert a blank tape with the side
you want to record on facing upward. Use TYPE I
(normal) tape only. Close the compartment.
2
Select the program source you want to record.
To record from the CD player, press
Ą Ȱ
on the unit
and place a CD.
To record from the radio, tune in the station you want
(see “Listening to the radio”).
3
Press
Ć Ȫ
on the unit to start recording (
à
is
depressed automatically).
To
Press
Pause recording
ê
Ȫ
on the unit.
Press the button again to
resume recording.
Stop recording
Ąì
Ȫ
on the unit.
Tips
ˎ
Adjusting the volume or the audio emphasis will not affect the
recording level.
ˎ
For the best results, use the AC power as a power source for
recording.
ˎ
To erase a recording, proceed as follows:
1 Insert the tape whose recording you want to erase.
2 Make sure that “TAPE” is displayed. (If “TAPE” is not displayed,
press
à Ȫ
on the unit or press FUNCTION
Ⱦ
on the remote
until it appears in the display.)
3 Press
Ć Ȫ
on the unit.
