Sony CDX-NC9950, Service Manual

Page: 5 / 58

5
CDX-NC9950
SECTION 1
GENERAL
This section is extracted
from instruction manual.
• LOCATION OF CONTROLS
• CONNECTIONS
8
Location of controls
a
SOURCE (Power on/Radio/CD/MD/
AUX
* 1 ) button
To select the source.
b
OFF (Stop/Power off) button
To turn off the unit/stop playback or radio
reception.
c
Display window
d
ENTER button
CD/MD/Radio:
To change the functions of the R dial.
Menu:
To decide an item/apply a setting of the
menu item.
e Z
(Open/Close) button
To open/close the front panel/eject a disc
when loaded.
f
L (Left) dial
To adjust the volume.
g
CUSTOM button * 2
CD/MD/Radio/AUX:
To perform the function assigned.
Menu:
To return to a previous display.
h
Receptor
To receive signals from the card remote
commander or wireless rotary commander.
i
Reset button
To reset the unit.
j
MENU button
To display the main menu for settings and
adjustments.
k
R (Right) dial
CD/MD/Radio:
To select the desired radio station, track,
group*
3 or disc* 4 .
Menu:
To select an item.
Note on using the L/R dials
Before using the L/R dials, push in and release
them first. Push in again when storing after use.
*1 When an optional Sony portable device is
connected.
*2 When the optional NVX-HC1 is connected, this
button has a different function. For details, see the
operating instructions supplied with the NVX-HC1.
*3 When an MP3/ATRAC CD is played.
*4 When an optional CD/MD changer is connected.
CDX-NC9950
SOURCE
CUSTOM
OFF
VOL
MENU
ENTER
9
The buttons on the card remote
commander share the same functions as
those on the unit.
a
OFF button
b
Number buttons * 1
Radio: To store/receive stations.
CD/MD: To change playback mode.
(1)
: REP
(2) : SHUF
(5) : BBE MP* 2 * 3 2
To activate the BBE MP function, set “BBE
MP ON.” To cancel, set “BBE MP OFF.”
(6) : PAUSE* 3
c MENU button
d
< / M / , / m buttons
< / , :
To skip tracks/fast-forward, reverse a track/
tune in stations automatically, find a station
manually/select a setting.
M / m
:
To receive preset stations/change the disc* 4 ,
skip group* 5 /select a menu.
e
BACK button
To return to a previous display.
f
PTY button
To display the PTY list.
g AF button
To turn the AF function on or off.
h
VOICE, TMC, MARK, MAP buttons
*
6
i
NAVI button * 6
j SCREEN button
To select the display mode.
k
IMAGE button
To select the display pattern.
l
CAPTURE button
To store images.
m
ENTER button
To decide an item/apply a setting.
n
SOURCE button
o MODE button
To change the radio band/playback unit.
p
ATT button
To attenuate the sound. To cancel, press
again.
q TA button
To turn the TA function on or off.
r
VOL (+/–) buttons
*1
Number buttons 7, 8, 9 and 0 can be used when
the optional NVX-HC1 is connected.
*2
You can also change the BBE MP setting by using
the main menu. During playback on this unit, press
(MENU)
, then set “BBE MP” in “PlayMode” to “ON”
or “OFF.”
*3
When playing back on this unit.
*4
When an optional CD/MD changer is connected.
*5
When an MP3/ATRAC CD is played.
*6
When the optional NVX-HC1 is connected.
Note
If the display disappears by pressing
(OFF) , the unit
cannot be operated with the card remote commander
unless
(SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
“Replacing the lithium battery” on page 36.
Card remote commander RM-X150
1
OFF NAVI
PTY ATT TA AF
VOICE MAP MARK TMC
VOL
REP SHUF SCREEN
CAPTURE
IMAGE BBE MP
MENU
BACK
SOURCE
ENTER
MODE
PAUSE
2 3
4 5 6
7 8
0
9
AUDIO OUT
FRONT SUB OUT NV-BUS
AUDIO OUT
REAR
VIDEO IN
VIDEO IN
BUS CONTROL IN
BUS AUDIO IN/AUX IN *
1
VIDEO IN
BUS AUDIO IN/AUX IN
* 1
BUS CONTROL IN
A
B
Source selector * 2
Signalquellenwähler *
2
Sélecteur de source * 2
Selettore di fonte
*
2
Geluidsbronkiezer *
2
XA-C30
* 1 Use the AUX-IN selector
XA-300 (not supplied) when
you want to connect the audio
outputs of a DVD player to
the BUS AUDIO IN/ AUX IN
terminal.
*
2 not supplied
*
1
Verwenden Sie den AUX-IN-
Signalquellenwähler XA-300
(nicht mitgeliefert), wenn Sie
die Audioausgänge eines DVD-
Players mit dem Anschluss BUS
AUDIO IN/AUX IN verbinden
möchten.
* 2 nicht mitgeliefert
* 1 Utilisez le sélecteur AUX-IN XA-
300 (non fourni) lorsque vous
souhaitez raccorder les sorties
audio d’un lecteur DVD à la
borne BUS AUDIO IN/AUX IN.
* 2 non fourni
* 1 Se si desidera collegare le
uscite audio di un lettore DVD al
terminale BUS AUDIO IN/AUX
IN, utilizzare il selettore AUX-IN
XA-300 (non in dotazione).
*
2
non in dotazione
* 1 Gebruik de AUX-IN
keuzeschakelaar XA-300 (niet
bijgeleverd) als u de audio-
uitgangen van een DVD-speler
wilt aansluiten op de BUS
AUDIO IN/AUX IN aansluiting.
*
2 niet bijgeleverd
Voorbeeldaansluitingen (
2
)
Opmerkingen ( 2 -A)
• Sluit eerst de aarddraad aan voordat u de versterker aansluit.
•
U hoort de pieptoon alleen als de ingebouwde versterker wordt
gebruikt.
Tip (
2
-B- )
Om twee of meer CD/MD-wisselaars aan te sluiten, hebt u de
geluidsbronkiezer XA-C30 (optioneel) nodig.
Exemple de raccordement (
2
)
Remarques ( 2 -A)
• Raccordez d’abord le câble de mise à la masse avant de
connecter l’amplifi cateur.
• Un bip est émis uniquement lorsque l’amplifi cateur intégré est
utilisé.
Conseil ( 2
-B- )
Dans le cas du raccordement de deux changeurs de CD/MD
ou plus, le sélecteur de source XA-C30 (en option) est
indispensable.
Anschlussbeispiel (
2
)
Hinweise (
2
-A)
• Schließen Sie unbedingt zuerst das Massekabel an, bevor Sie
den Verstärker anschließen.
• Der Signalton wird nur ausgegeben, wenn der integrierte
Verstärker verwendet wird.
Tipp ( 2 -B- )
Zum Anschließen von zwei oder mehr CD/MD-Wechslern wird der
gesondert erhältliche Signalquellenwähler XA-C30 benötigt.
Esempio di collegamento (
2
)
Note (
2
-A)
• Assicurarsi di collegare il cavo di terra prima di collegare
l’apparecchio all’amplifi catore.
• Il segnale acustico viene emesso solo se viene utilizzato
l’amplifi catore incorporato.
Suggerimento ( 2 -B- )
Per collegare due o più cambia CD/MD, si deve utilizzare il
selettore di fonte XA-C30 (opzionale).
Connection example (
2
)
Notes ( 2
-A)
• Be sure to connect the earth lead before connecting the
amplifi er.
• The alarm will only sound if the built-in amplifi er is used.
Tip (
2
-B- )
For connecting two or more CD/MD changers, the source
selector XA-C30 (optional) is necessary.