CDX-M60UI/MR60UI
30
Pin No.
Pin Name
I/O
Description
58
WAKE_UP
O
CD mechanism deck micon wake up signal output
59
MC_RX
I
MC-BUS communication and CD mechanism deck micon communication RX input
60
MC_TX
O
MC-BUS communication and CD mechanism deck micon communication TX output
61
CLK
O
Flash programming serial clock signal output
62
Z_MUTE
I
Z mute signal input
63
ILL_IN
I
Key illumination signal input
64
TEST
I
Test mode detect signal input
65
VCC
–
Power supply pin (+3.3 V)
66
VSS
–
Ground
67
NCO
O
Not used. (Open)
68
AMP_STB
O
Standby signal output for power regulator IC
69
DIAG
I
Condition signal input from power amp IC
70
EJECT_OK
O
Eject OK signal output
71
SA_OUT
O
Spectrum analyzer serial data output
72
SA_CLK
O
Spectrum analyzer serial clock signal output
73
F_AUX
O
Front AUX mute signal output
74
TU_ATT
O
Not used in this set. (Open)
75
CD_MUTE
O
CD mute signal outout
76
RDS_ON
O
RDS IC power supply control signal output (CDX-MR60UI)
77
FLASH_EN0
I
Flash writer programming wake up signal input (Fixed at L)
78
FLASH_EN1
I
Flash writer programming wake up signal input
79
USB_ON
O
USB over current detect IC control signal output
80
DD_ON
O
DC/DC converter power supply ON/OFF control signal output
81
XFLASH
I
Not used in this set. (Fixed at L)
82
NCO
O
Not used. (Open)
83
BU_CHECK
I
Back up power supply detect signal input
84
DAVN
I
RDS data block sync detect signal input (CDX-MR60UI)
85 to 87
NCO
O
Not used. (Open)
88
V-BUS_ON
I
VBUS power supply control signal input (L: VBUS OFF, H: VBUS ON)
89
USB_OVR
I
USB over current detect signal input
90
VCC
–
Power supply pin (+3.3 V)
91
VSS
–
Ground
92
OSC_IN
I
High speed operation clock signal input (7.92 MHz)
93
OSC_OUT
O
High speed operation clock signal output (7.92 MHz)
94
NCO
O
Not used. (Open)
95
SIRCS
I
Remote control signal input
96
NCO
O
Not used. (Open)
97
BEEP
O
Beep signal output for power amplifi er IC
98
ZAPPIN_BEEP
O
Zappin beep signal output
99
SYNC_OUT
O
DC/DC converter oscillation frequency control signal output
100
NCO
O
Not used. (Open)
