14
Adjust the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1
Turn down the volume on the unit.
2
Press
(SOURCE)
repeatedly until “AUX”
appears.
“AUX REAR IN” appears.
3
Start playback of the portable audio device at a
moderate volume.
4
Set your usual listening volume on the unit.
5
Press the select button repeatedly until “AUX”
appears, and rotate the volume control dial to
adjust the input level (–8 dB to +18 dB).
Rotary commander RM-X4S
Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
The following controls on the rotary commander
require a different operation from the unit.
•
PRESET/DISC control
The same as
(1)
/
(2)
(GP/ALBM –/+) on the
unit (push in and rotate).
•
VOL (volume) control
The same as the volume control dial on the unit
(rotate).
•
SEEK/AMS control
The same as
(SEEK)
–/+ on the unit (rotate, or
rotate and hold).
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
1
While pushing the VOL control, press and
hold
(SEL)
.
SEL
DSPL
MODE
SEL
DSPL
MODE
OFF
ATT
SEL
SOURCE
DSPL
MODE
OFF
VOL
SEEK/AMS
PRESET/
DISC
To increase
To decrease
