21
Creating a program
— Program Memory (For a CD/MD unit with
the program memory function)
You can play tracks in the order you want by
creating and storing programs in the unit‘s
memory. You can select up to 24 tracks for a
program. You can store the programs in
memory.
1
During CD playback, press
(SHIFT)
, then
press
(4)
(PLAY MODE) for two seconds.
Program edit mode
If you have labelled the disc, the bank edit
mode appears. Press
(4)
(PLAY MODE) to
display “P” above.
2
Select the track you want.
1
Press
(SOURCE)
repeatedly to select
CD or MD.
2
Press
(MODE)
repeatedly to select the
unit.
3
Press
(SHIFT)
, then press the number
button to select the disc.
4
Press
(SHIFT)
.
5
Push the SEEK/AMS control up or
down to select the track.
3
Press
(6)
(ENTER).
4
To continue entering tracks, repeat steps
2 and 3.
5
When you finish entering tracks, press
(4)
(PLAY MODE) for two seconds.
6
Press
(SHIFT)
.
µ
RLAY MODE
ENTER
DISC
TRACK
RLAY MODE
ENTER
RLAY MODE
ENTER
DISC
TRACK
Notes
•
“
*
Wait
*
” appears in the display while the unit is
reading the data, or when a disc has not been
put into the unit.
•
“
*
Mem Full
*
” appears in the display when you
try to enter more than 24 tracks into a program.
Playing the stored program
Changing the disc order in the unit will not
affect program memory play.
1
Press
(SHIFT)
.
2
Press
(4)
(PLAY MODE) repeatedly until
“PGM” appears.
3
Press
(5)
(
n
) repeatedly until “PGM on”
appears.
Program Play starts.
4
Press
(SHIFT)
.
To return to normal playback mode, select
“PGM off” in step 3 above.
Notes
• If you press a number button during program
memory play, program memory play is
interrupted, and playback of the selected disc
starts.
• “NO Data” appears in the display if no track is
stored in the program.
•
If a track stored in the program memory is not in
the disc magazine, the track will be skipped.
•
When the disc magazine contains no tracks
stored in the program memory, or when the
program information has not been loaded yet,
“Not ready” appears.
RLAY MODE
PGM
