15
Tip
When the POWER SELECT switch is set to position
B
, you can turn on this unit by pressing
(SOURCE)
on the rotary commander.
By rotating the control
(the SEEK/AMS control)
Rotate the control and release it to:
•Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback.
•Tune in stations automatically. Rotate and
hold the control to tune in a specific
station.
By pushing in and rotating the
control (the PRESET/DISC control)
Push in and rotate the control to:
•Receive the stations memorized on the
number buttons.
•Change the disc.
Other Functions
You can also control an optional CD or MD
unit, or equalizer preamplifier with the rotary
commander.
Labelling the rotary
commander
Depending on how you mount the rotary
commander, attach the appropriate label as
shown in the illustration below.
Using the rotary
commander
By pressing buttons
(the SOURCE and MODE buttons)
Each time you press
(SOURCE)
, the
source changes as follows:
TUNER
n
CD
n
MD
*
n
TV
*
*
If the corresponding optional equipment is
not connected, this item will not appears.
Pressing
(MODE)
changes the operation
in the following ways;
• Tuner:
FM1
n
FM2
n
AM
• CD unit:
CD1
n
CD2
n
…
• MD unit: MD1
n
MD2
n
…
• TV/Video: TV
n
Video1
n
Video2
n
…
SOUND
LIST
MODE
SOUND
LIST
MODE
(SOURCE)
(MODE)
