22
EN
Adding tracks to a programme
1
Press
(SHIFT)
, then press
(4)
(PLAY
MODE) for two seconds.
“P 1” shows Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press
(4)
(PLAY MODE) to
display “P 1” above.
To select Programme 2, press
(5)
(
n
)
repeatedly until “P 2” appears.
2
Press
(2)
(
N
) or
(5)
(
n
) to select the
track slot number where you want to
insert a track.
3
Push the SEEK/AMS control up or down
to select the track you want to insert.
4
Press
(6)
(ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled,
“
*
Mem Full
*
” appears in the display, and you
cannot insert tracks.
5
When you finish inserting tracks, press
(4)
(PLAY MODE) for two seconds.
6
Press
(SHIFT)
.
Track slot number
PLAY
DISC
TRACK
MODE
ENTER
PLAY
DISC
TRACK
MODE
ENTER
Erasing an entire programme
1
Press
(SHIFT)
, then press
(4)
(PLAY
MODE) for two seconds.
“P 1” shows Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press
(4)
(PLAY MODE) to
display “P 1” above.
2
Press
(2)
(
N
) repeatedly until “DEL”
appears.
To erase Programme 2, press
(5)
(
n
)
repeatedly until “PGM 2” appears.
3
Press
(6)
(ENTER) for two seconds.
The entire programme is erased.
4
When you finish erasing programmes,
press
(4)
(PLAY MODE) for two seconds.
5
Press
(SHIFT)
.
PLAY
DISC
TRACK
MODE
ENTER
PLAY MODE
ENTER
PLAY MODE
ENTER
