18
CDX-454RF/454XRF
power supply
(DC 14.4 V)
Compact disc changer
wired remote commander
(RM-X82RF)
GND
+
DISPLAY connector (CN302)
POWER connector (CN303)
SECTION 6
ELECTRICAL CHECK
Note:
1. This adjustment is performed with the set placed horizontally.
2. Power supply voltage: DC14.4 V (more than 3 A).
3. Be sure to use the disc “YEDS-18” parts code: 3-702-101-01, but only
when indicated.
Connection:
Focus Bias Check
Connection:
– RF Board (Component Side) –
Procedure:
1. Connect the oscilloscope to TP (RFO) and TP (VC) on the RF
board.
2. Put the set into play mode by loading the disc (YEDS-18).
3. Confirm that oscilloscope waveform is clear and check RF sig-
nal level is correct or not.
Note:
Clear RF signal waveform means that the shape “
◊
” can be clearly distin-
guished at the center of the waveform.
When observing the eye pattern, set the oscilloscope to AC range
and raise the vertical sensitivity so that it may be easily seen.
oscilloscope
(AC range)
+
–
TP (VC)
TP
(RFO)
IC101
RF signal waveform
VOLT/DIV: 200 mV
TIME/DIV: 500 ns
(10 : 1 probe in use)
level: 1.4
±
0.3 Vp-p
Summary of Contents for CDX-454RF - Compact Disc Changer System
Page 20: ...20 CDX 454RF 454XRF MEMO ...
Page 49: ...49 CDX 454RF 454XRF MEMO ...
