background image

7

To locate succeeding
tracks

To locate preceding
tracks

 FM I

 ”

 FM II

 FM III

 AM

To search backward

To search forward

Radio

Memorizing stations
automatically

— Best Tuning Memory (BTM)

This unit selects the stations with the strongest
signals and memorizes them in the order of
their frequencies. You can store up to 6 stations
on each band (FM I, FM II, FM III, and AM).

Caution

When tuning in stations while driving, use
Best Tuning Memory to prevent accidents.

1

Press 

(SOURCE)

 repeatedly to select the

tuner.

Each time you press 

(SOURCE)

, the mode

changes as follows:

CD 

˜

 TUNER

2

Press 

(MODE)

 repeatedly to select the

band.

Each time you press 

(MODE)

, the band

changes as follows:

3

Press 

(SENS/BTM)

 for two seconds.

The unit stores stations in the order of their
frequencies on the number buttons.
A beep sounds when the setting is stoned.

Notes

The unit does not store stations with weak
signals. If only a few stations can be received,
some number buttons will retain their former
setting.

When a number is indicated in the display, the
unit starts storing stations from the one currently
displayed.

If a CD is not in the unit, only the tuner band
appears even if you press 

(SOURCE)

.

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, push the SEEK/AMS
control up or down and release for each
track you want to skip.

Locating a specific point in a track

— Manual Search

During playback, push the SEEK/AMS
control up or down and hold for about
two seconds. Release when you have
found the desired point.

Note

If “

” or “

” appears in the

display, you have reached the beginning or the
end of the disc and you cannot go any further.

Playing a CD in various
modes

Playing tracks repeatedly

— Repeat Play

Press 

(1)

 during playback.

“REP” appears in the display.

When the current track is over, it will play
again from the beginning.

To return to normal playback mode, press
again.

Playing tracks in random order

— Shuffle Play

Press 

(2)

 during playback.

“SHUF” appears in the display.

To return to normal playback mode, press
again.

SEEK/AMS

SEEK/AMS

Summary of Contents for CDX-4250 - Fm/am Compact Disc Changer System

















Reviews: