9
EN
Receiving the memorised
stations
1
Press
(SOURCE)
repeatedly to select the
tuner.
2
Press
(MODE)
repeatedly to select the
band (FM1, FM2, MW or LW).
3
Press the number button (
(1)
to
(10)
)
momentarily where the desired station is
stored.
If you cannot tune in a preset
station
Push the SEEK/AMS control up or down
momentarily to search for the station
(automatic tuning).
Scanning stops when the unit receives a
station. Push the SEEK/AMS control up or
down repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
(SHIFT)
, then press
(3)
(PLAY MODE) repeatedly
until “LOCAL” (local seek mode) is displayed. Then
press
(4)
(
n
) to select “LOCAL-ON”. Press
(SHIFT)
.
Only the stations with relatively strong signals will
be tuned in.
Tip
If you know the frequency of the station you want
to listen to, push the SEEK/AMS control up or
down and hold until the desired frequency
appears (manual tuning).
Radio
If FM stereo reception is poor
— Monaural Mode
1
Press
(SHIFT)
, then press
(3)
(PLAY
MODE) repeatedly until “MONO”
appears.
2
Press
(4)
(
n
) repeatedly until “MONO-
ON“ appears.
The sound improves, but becomes
monaural (“ST” disappears).
3
Press
(SHIFT)
.
To go back to normal mode, select “MONO-
OFF” in step 2 above.
Changing the displayed items
Each time you press
(DSPL)
, the item changes
as follows:
z
Frequency
z
Clock
MOTION DISPLAY
*
Z
*
All the items above are scrolled in the display
one by one in order.
