8
EN
Actual total number:
Sony CDX-4100/5100RDS (
E
,F,G,I) 3-810-809-
11
(1)
3
FM1, FM2 and FM3 only:
Press preset number button
1
INTRO
momentarily, then press again for about
two seconds until you hear a beep tone.
n
The station will be stored.
Repeat this operation with preset number
buttons
2
REPEAT
through
6
.
Notes
•
When “AF OFF” is displayed and you activate BTM, the
unit will store only stations not transmitting RDS data.
Depending on reception conditions however, it may
happen that RDS stations are stored.
•
When storing only RDS stations (page 10), step 3 is not
necessary.
Memorising Only the
Desired Stations
1
Select the desired band.
2
Tune in the station which you wish to
store on a preset number button.
3
Press and hold the desired preset
number button (
1
INTRO
to
6
) for about
two seconds until you hear a beep tone.
The number of the pressed preset number
button appears in the display window.
Up to 6 stations on each band (FM1, FM2, FM3, MW and
LW) can be stored on the preset number buttons in the
order of your choice. Therefore, 18 stations can be
memorised on FM.
If you try to store another station on the same preset
number button, the previously stored station will be erased.
Tuning in by Adjusting the
Frequency
— Manual Tuning
1
Select the desired band.
2
Press and hold either side of the PRESET
button.
Release the button when the desired station
is received.
PREVENT ACCIDENTS!
When tuning in during driving, use automatic
tuning or the preset search function (page 9)
instead of manual tuning.
Memorising Stations
Automatically
— BTM (Best Tuning Memory) Function
This function selects from the currently
selected band the stations with the strongest
signals and memorises them in the order of
their band frequency.
1
Select the desired band.
2
Press the
SENS
BTM
button for more than two
seconds.
•
When there is no preset number indicated
in the display window, stations will be
stored on all preset number buttons on
the currently selected band.
•
When there is a preset number indicated
in the display window, the unit will store
stations on all preset number buttons
from the one currently displayed.
For example, when you select FM1 and preset
number 3 is displayed,
the operation will start from preset number 3 on FM1, and
will stop at preset number 6 on FM3.
TUNER
PRESET
PRESET
For lower frequencies
For higher frequencies
TUNER
TUNER
