Sony CDP-D11, Operating Instructions Manual

Page: 6 / 24

Basic playback operation
6
1
Turn on the mixer and adjust fader or level of the
connected channel.
2
Turn on this unit.
3
Insert the disc.
8cm disc can be
played without
adapter.
Playback
z
Playback can be started in
step
4
by selecting a track
number.
1 Turn the AMS control until
the desired track number is
displayed.
(To use the remote control,
press the
=
or
+
button.)
2 Press the AMS control or the
fl button.
z
Ejecting function can be
turned not to work to avoid
ejecting the disc by mistake
during playback or pause
mode.
1 Press the MENU/EXIT button
in stop mode to display
“MENU Mode”.
2 Turn the AMS control until
“PLAY/PAUSE” is displayed,
then press the AMS control.
3 Turn the AMS control until
“EJECT Disable” is displayed,
then press the AMS control.
4 Press the MENU/EXIT button.
To change so that ejecting
function is always workable,
select “EJECT Enable” in step 3.
2 3 4
Label side up
What to be
To stop playback
To pause playback
To skip to the next track
To return to the previous
track
To eject the disc
Operation
Press
p
.
Press
fl
.
(Playback starts by pressing it again.)
Turn AMS to right.
(Press
+
in the remote control.)
Turn AMS to left.
(Press
=
in the remote control.)
Press
§
EJECT.
z
To use the headphones
Connect headphones to PHONE
jack in the front panel.
Adjust the volume by PHONE
LEVEL control.
MENU/EXIT DISPLAY
A CUE
VARI
SPEED
PUSH MARK/ENTER
LOCATE
4
Press the
fl
button.
Playback starts.