Sony CDP-CE535 - Compact Disc Player, Operating Instructions Manual

Page: 23 / 116

Recording From CDs Recording From CDs Recording From CDs Recording From CDs Recording From CDs Recording From CDs Recording From CDs
23 GB
Adjusting the Recording Level
(Peak Search)
The player locates the highest level among the tracks to
be recorded to let you adjust the recording level before
you start recording.
1
Before you start playing, press PEAK SEARCH.
“PEAK” flashes in the display and the player starts
scanning the disc searching for the highest peak
level.
After scanning all the tracks, the player repeats the
portion with the highest peak level.
2
Adjust the recording level on the deck.
3
Press p on the player to stop Peak Search.
“PEAK” disappears from the display.
Notes
•
The portion with the highest level may differ every time
you try the adjustment on the same disc. The difference is,
however, so slight that you won’t find any problem in
adjusting the recording level precisely.
•
Peak Search does not operate while you open the disc tray
by pressing the EX-CHANGE button.
PEAK SEARCH p
Fading out at the specified time
(Time Fade)
You can have the player fade out automatically by
specifying the playing time. Once you set the Time
Fade, it works twice, that is, the play fades out at the
end of both sides of a tape.
1
Press EDIT/TIME FADE repeatedly before you
start playing until
FADE
TIME
and “A” in the
A
indication appear in the display.
2
Press 0 or ) to specify the playing time.
Each time you press these buttons, the display
changes as shown below with the playing time of
one side.
3
Press · to start playing.
At the specified time the play fades out and the
player pauses. “B” in the
B
indication appears
in the display.
4
To record on side B, reverse the tape and press ·
or P on the player to resume playing.
Again, the play fades out at the specified time.
To cancel Time Fade
Press EDIT/TIME FADE.
You can freely specify the playing time
See “You can freely specify the tape length” on page 22.
You can change discs during Time Fade
The specified fade-out time is counted only during
playing. So, you can change discs if the play ends before
the specified fade-out time (for example, when you
record CD-singles on a tape).
You can fade in to resume playing in Step 4
After you reverse the tape, press FADER.
Note
If you press the 0 or ) button during Time Fade Play,
Time Fade will be canceled.
n C-46 23.00 N n C-54 27.00 N
n C-60 30.00 N
n - -. - - N n C-90 45.00 N n C-74 37.00 N