Sony CCD-TRV312 Operating Instructions (primary manual) Operating Instructions Manual Download

Page: 9 / 76

Getting started

To remove the battery pack

Slide the battery pack in the direction of the arrow.

Notes on charging the battery pack

• The POWER lamp will remain lit for a while even if the battery pack is removed and

the power cord is unplugged after charging the battery pack. This is normal.

• If the POWER lamp does not light, set the selector to VTR (DC OUT) and disconnect

the power cord. After about one minute, reconnect the power cord and set the
selector to CHARGE again.

• You cannot operate the camcorder using the AC power adaptor while charging the

battery pack.

Installing the battery pack

(1)

Insert the top of the battery pack into the top of the battery mounting surface.

(2)

Push the battery pack. Make sure that you hear clicks twice. Attach the
battery pack to the camcorder securely.

Note on the battery pack

Do not carry the camcorder by grasping the battery pack.

To remove the battery pack

Slide BATT, and then pull the lower part
of the battery pack.

You can look at the demonstration of the functions available with this camcorder.
(p. 28)

Charging and installing the battery pack

Summary of Contents for CCD-TRV312 Operating Instructions (primary manual)













































































Search results

Summary of Contents for CCD-TRV312 Operating Instructions (primary manual)

Reviews:

Related manuals for CCD-TRV312 Operating Instructions (primary manual)

Brands by name

Popular brands

Sony CCD-TRV312 Operating Instructions (primary manual), Operating Instructions Manual

Search results

Summary of Contents for CCD-TRV312 Operating Instructions (primary manual)

Reviews:

Related manuals for CCD-TRV312 Operating Instructions (primary manual)

Brands by name

Popular brands