background image

26

Battery life (in minutes)

Using Sony alkaline batteries at 77 

°

F (25 

°

C)

While playing
back on LCD

While recording

LCD open LCD close

Approximate continuous recording time indoors. Figures in parentheses are
approximate recording time when  you repeat recording start/stop, zooming and
turning the power on/off.
The actual battery life may be shorter.

Notes

• You may not use the battery case in cold environment.
• The above battery lives are estimates. The battery life may be shorter depending on

the storage condition of the battery before being purchased and temperature.

To remove the battery case

The battery case is removed in the same way as the battery pack.

Using a car battery

Use Sony DCP-77 DC pack (not supplied). Connect the cord of the DC pack to the
cigarette lighter socket of the car (12 V or 24 V). Connect the DC pack to the battery
mounting surface of the camcorder.

To remove the DC pack

The  DC pack is removed in the same way as the battery pack.

Using alternative power sources

Model

CCD-TRV32

110 (55)

165 (85)

120

CCD-TRV52

100 (50)

160 (80)

100

CCD-TRV53

110 (55)

165 (85)

120

Summary of Contents for CCD-TRV312 Operating Instructions (primary manual)













































































Reviews: