Sony CCD-TR78 - Video Camera Recorder 8mm Operation Manual Download

Page: 55 / 56

CCD-TR78/TR88/TR98 3-810-917-13.E

Warning Indicators

All indicators appear only when you use the camcorder in CAMERA mode.
If indicators flash in the viewfinder, or a caution lamp on the camcorder flashes, check the following:

≥

: You can hear the beep sound when BEEP is set to ON (p. 29).

Battery Remaining

Slow flashing: The battery is weak.
Fast flashing: The battery is dead.

The tape is near the end.

The tape has run out.

No tape has been inserted.

The tab on the tape is out (red) (p. 9).

Moisture condensation has occurred (p. 38).

indicator appears only when the cassette is inserted.

The video heads may be contaminated (p. 39).

Some other trouble has occurred.

Disconnect the power source and contact your Sony dealer or local authorized facility.

The lithium battery is weak or the lithium battery is not installed (p. 31).

This indicator flashes just only after powering on.

Identifying the Parts/Warning Indicators

Summary of Contents for CCD-TR78 - Video Camera Recorder 8mm

























































Search results

Summary of Contents for CCD-TR78 - Video Camera Recorder 8mm

Reviews:

Related manuals for CCD-TR78 - Video Camera Recorder 8mm

Brands by name

Popular brands

Sony CCD-TR78 - Video Camera Recorder 8mm, Operation Manual

Search results

Summary of Contents for CCD-TR78 - Video Camera Recorder 8mm

Reviews:

Related manuals for CCD-TR78 - Video Camera Recorder 8mm

Brands by name

Popular brands