44
CCD-TR78/TR88/TR98 3-810-917-13.E
Symptom
Cause and/or Corrective Actions
• You pressed DATE and TIME together for more than
2 seconds.
m
The camcorder is not malfunctioning.
You may start recording.Flashing will stop soon.
m
Reset the date and time. (p.33)
• START/STOP MODE is set to
or 5 SEC.
m
Set it to
. (p.26)
• LIGHT is set to AUTO.
m
Set it to ON. (p.22)
• LIGHT is set to AUTO.
m
Set it to ON. (p.22)
• Bulb is dead.
m
Replace the bulb. (p.23)
Picture
Symptom
Cause and/or Corrective Actions
• The viewfinder lens is not adjusted.
m
Adjust the viewfinder lens. (p.11)
• The contrast between the subject and background is
too high.
m
The camcorder is not malfunctioning. Change
locations.
• The video heads may be dirty.
m
Clean the heads using the Sony V8-25CLH cleaning
cassette. (p.39)
Others
Symptom
Cause and/or Corrective Actions
• COMMANDER is set to OFF.
m
Set it to ON. (p.29)
• Something is blocking the infrared rays.
m
Remove the obstacle.
• The battery is not inserted with the correct polarity.
m
Insert the battery with the correct polarity. (p.52)
• The batteries are dead.
m
Insert new ones. (p.52)
m
Detach the eyecup and clean the viewfinder lens.
(p.40)
Trouble Check
The date or time
indicator is flashing.
The date or time indicator
disappears.
Recording stops in a few
seconds.
The built-in light turns off
while in use.
The built-in light does not
turn on when LIGHT is set
to ON.
The built-in light turns on
and off repeatedly.
The image on the viewfinder
screen is not clear.
A vertical band appears when a
subject such as lights or a candle
flame is shot against a dark
background.
The picture is “noisy”.
The supplied Remote
Commander does not work.
There is dust in the viewfinder.
(CCD-TR78/TR88 only)
