1-5 (E)
CBK-SD01
1-6. Select Output Signal
Select the output signal following the steps as shown below.
Identifying switches
1.
Turn on the main power.
2.
While pressing the rotary encoder, set the MENU ON/OFF switch to ON to open the TOP
menu.
3.
Select the OPERATION menu and press the rotary encoder.
4.
Select the OUTPUT display and press the rotary encoder.
5.
Move the cursor (
→
) to REAR BNC SEL and press the rotary encoder to select SDI.
6.
Turn off the main power.
CANCEL/PRST
OFF
ON
ESCAPE
MENU
ON/SEL
OFF
STATUS
Rotary
encoder
STATUS ON/
SEL/OFF switch
MENU ON/OFF
switch
MENU CANCEL/PRST/
ESCAPE switch
The illustration shows the PDW-510/510P/530/530P.
