Install Multiple Video Switchers in a Control4
System
When installing multiple Sony video switchers in a Control4 system, follow
these guidelines:
•
Set up multiple video switchers as supported for the Control4 controller.
Media Controller supports four video switchers. HC-300 supports up to 2
video switchers. Home Theater Controller supports one video switcher and
therefore does not support the use of the multiple video switchers.
•
Use the provided serial ports, cable, and "Installation" instructions to con-
nect the Sony video switcher directly to the HC-300 or Media Controller
serial ports. The Media Controller has a total of four serial ports, including
two DB9 connector ports and two pluggable terminal block ports. The HC-
300 has a total of two serial ports, both with DB9 connectors.
•
The Sony video switchers must be connected directly to the Control4 con-
troller. No daisy chain connections are supported.
Configure the Sony Video Switcher within the
Control4 System
Use
Composer
software (
Professional Edition
) to configure the Sony
CAV-CVS12ES Component Video Switcher within the Control4 system.
Refer to the Composer User Guide for more details.
Warranty
Sony provides the warranty for the Sony CAV-CV12ES Component Video
Switcher. For more information, please see the enclosed Sony Warranty
Reference Card.
About this Document
Copyright © 2007 Control4 Corporation. Control4 and the Control4 logo are
registered trademarks of Control4 Corporation. Sony is a registered trademark
of Sony Corporation. All other trademarks are properties of their respective
owners.
Part Number: 200-00052 Rev A
