1-2 (E)
CAC-6
1-2. Location and Function of Parts
6
Connector
5
Mounting part
4
Lock lever
1
RET 1 button
2
RET 2 button
3
MIC button
Location and function of parts
1
RET 1 (return video 1) button
With
your
fi
nger on this button, the return video 1
signal appears on the view
fi
nder screen. When the
button is released, the picture picked up by the camera
appears.
2
RET 2 (return video 2) button
With
your
fi
nger on this button, the return video 2
signal appears on the view
fi
nder screen. When the
button is released, the picture picked up by the camera
appears.
n
When you are touching both the RET 1 and RET 2
buttons simultaneously, the return video 1 signal
appears.
3
MIC (microphone) button
With
your
fi
nger on this button, the microphone of the
headset is turned on. When the button is released, the
microphone is turned off.
4
Lock lever
Used to lock the mounting angle of the CAC-6.
5
Mounting part
Used to mount the CAC-6 to the panning rod of a
tripod. The diameter of the mounting part is 25 mm.
6
Connector (6-pin)
Used to connect to the RET CONTROL connector on a
video camera.
Pin assignment
Pin No.
Signals
1
ON/OFF of the microphone for intercom 1
2
ON/OFF of the microphone for intercom 2
3
GND
4
Not used
5
ON/OFF of the return video 1 signal
6
ON/OFF of the return video 2 signal
