2-2 (E)
CA-950/950P IMM
Top panel
Dustproof filters
Dustproof filters
Left side panel
2.
When the turn stops, pull out the remover in the
straight line forcebly.
n
The alignment sleeve can be removed/reinstalled with
the sleeve itself attached to the tip of the remover.
Great care should be taken so as not to lose or damage
the alignment sleeve.
(Alignment sleeve: Sony P/N 9-980-074-01)
3.
Clean the tip of the white optical contacts by a cotton
swab moistened with alcohol.
4.
Insert the remover with the alignment sleeve attached
to its tip, and push it until it clicks.
5.
Rotate the remover counterclockwise to extract the
remover.
2-2. Cleaning of Dustproof Filter
Clean the dustproof filters periodically every two or three
months. Clogged filter may cause trouble because the
inside temperature of the unit will rise.
Left side panel
1.
Loosen the four screws and open the left side panel.
2.
Dust the dustproof filter each with a blower.
Top panel
1.
Separate a CA-950/950P from the camera.
2.
Remove the top panel. (Refer to Section 1-4.)
3.
Clean off dust of the dustproof filters with a blower.
Alignment sleeve
Optical contacts (white)
2-1. Cleaning of Connector/Cable
2-2. Cleaning of Dustproof Filter
Summary of Contents for CA-950
Page 24: ......
