1-16 (E)
CA-950/950P IMM
Ref. No.
Switch name
Description
Factory setting
S269
RTS1
Sets when connecting RTS kit to INCOM1 connector.
NORM
RTS: Can use RTS CH1 as INCOM1 connector
NORM: Normal mode
S389
RTS2
Sets when connecting RTS kit to INCOM2 connector.
NORM
RTS: Can use RTS CH2 as INCOM2 connector
NORM: Normal mode
S406-1
PGM1 TO
ON: Mixes PGM1 to TRACKER.
ON
TRACKER
OFF: Does not mix.
S406-2
PGM2 TO
ON: Mixes PGM2 to TRACKER.
OFF
TRACKER
OFF: Does not mix.
S406-3
INCOM2 R TO
ON: Mixes INCOM2 RECEIVE to TRACKER.
OFF
TRACKER (for AU-273)
OFF: Does not mix.
PROD R TO
ON: Mixes PROD RECEIVE to TRACKER.
ON
TRACKER (for AU-273P)
OFF: Does not mix.
S406-4
INCOM2 T TO
ON: Mixes INCOM2 TALK to TRACKER.
OFF
TRACKER (for AU-273)
OFF: Does not mix.
PROD T TO
ON: Mixes PROD TALK to TRACKER.
ON
TRACKER (for AU-273P)
OFF: Does not mix.
S555
TRACKER (T) 0/
_
20
Selects TRACKER TALK level of TRACKER connector.
0 (0 dBu)
0:
0 dBu (Standard)
_
20:
_
20dBu (Use this when input level is low.)
(0 dBu = 0.775 Vrms)
S580-1
*
TRACKER TO
ON: Mixes TRACKER to INCOM1 RECEIVE.
ON (for AU-273)
INCOM1 R
OFF: Does not mix.
OFF (for AU-273P)
S580-2
*
TRACKER TO
ON: Mixes TRACKER to INCOM2 RECEIVE.
OFF
INCOM2 R
OFF: Does not mix.
S580-3
TRACKER TO
ON: Mixes TRACKER to INCOM1 TALK.
ON
INCOM1 T
OFF: Does not mix.
S580-4
TRACKER TO
ON: Mixes TRACKER to INCOM2 TALK.
ON
INCOM2 T
OFF: Does not mix.
S601
INCOM1
Refer to the operation manual.
CM (Carbon)
CM/DYM (Panel)
S701
INCOM2
Refer to the operation manual.
CM (Carbon)
CM/DYM (Panel)
S624
GAIN (Panel)
Refer to the operation manual.
0 (0 dB)
S724
GAIN (Panel)
Refer to the operation manual.
0 (0 dB)
*
: Only used for AU-273. For AU-273P, always set to OFF.
1-5. Internal Switches Setting
Summary of Contents for CA-950
Page 24: ......
