Working Instruction (mech)
1277-9813 Rev 3
Sony Mobile Communications AB – Company Internal
52(82)
Replacement
4.39 Magnetic charger
connector
Follow the 3.1 - 3.6 and 3.9 Disassembly instructions!
Follow the 4.36 Removal instructions!
Carry out the Removal as described below!
Prepare a new Magnetic charger connector!
Carry out the Installation as described below!
Follow the 4.36 Installation instructions!
Follow the 5.2, 5.5 and 5.9-5.11 Reassembly
instructions!
REMOVAL
Push the two pads of
Magnetic charger connector by using
Flex Film Assembly Tool.
Scrap! Not to be reused!
Be careful! Do not damage the two pins of FPC charger.
INSTALLATION
Mount a new Magnetic charger connector by fingers.
Check and press the two pins into its cavities by using the
Front Opening Tool.
Be careful! Do not damage the two pins of FPC charger.
Then use Side Panel press, Side Panel Press Head and
Charge connector press pad with the force of 60N for five
seconds. According to 1003-9107 Tool Catalogue –
mechanical and document Side Panel press Instruction for
use.
