To create a Smart Connect event
1
Start the Smart Connection application. If you are opening Smart Connect for
the first time, tap
OK
to close the introduction screen.
2
On the
Events
tab, tap .
3
Give the event a name, then tap
Create
.
4
Under
When
, add either an accessory or a time interval, or both.
5
Under
Do this
, add what you want to happen in your device.
6
Under
At the end
, add what you want to happen when you disconnect the
accessory or when the time interval comes to an end. If both these conditions
are set, the actions start either when you disconnect the accessory, or when
the time interval comes to an end.
7
To save the event, press .
To add a Bluetooth™ accessory, you have to first pair it with your device.
To edit a Smart Connect event
1
Start the Smart Connection application.
2
On the
Events
tab, tap an event.
3
If the event is switched off, tap .
4
Adjust the settings as desired.
5
To save the event, press .
To delete an incorrect entry, touch and hold the entry and then tap
Delete
.
109
This is an Internet version of this publication. © Print only for private use.
