4(E)
1
Plug
Connect to the VF connector on the camcorder.
2
Stopper
Prevents the viewfinder from coming off the
camcorder when it is slid from side to side.
3
Tally indicator (rear)
Lights up when the camcorder receives a tally control
signal. This indicator can be covered when not in use.
4
Adjuster for the zebra pattern level range
Insert a precision screwdriver or similar tool, and
adjust the level for which the zebra pattern is
displayed.
5
Diopter adjustment ring
Allows for optimal adjustment of focus.
6
Tally indicator (front)
Lights up when the camcorder receives a tally control
signal. Turn the TALLY switch
!¡
OFF when not in
use. The brightness can also be adjusted with the
TALLY switch
!¡
.
7
PEAKING control
Turning this control clockwise adjusts the picture
sharpness, and makes focusing easier. This control has
no effect on the output signals of the camcorder.
8
CHROMA control
Adjusts the chroma level of the screen. This control
has no effect on the output signals of the camcorder.
9
CONTRAST control
Adjusts the contrast of the screen. This control has no
effect on the output signals of the camcorder.
0
BRIGHT control
Adjusts the brightness of the screen. This control has
no effect on the output signals of the camcorder.
!¡
TALLY switch
Controls the tally indicator
6
located on the front of
the viewfinder.
HIGH: The tally indicator brightness is set to high.
OFF: The tally indicator is disabled.
LOW: The tally indicator brightness is set to low.
!™
ZEBRA (zebra pattern) switch
Controls the zebra pattern display on the viewfinder
screen as follows:
ON: A zebra pattern appears and stays.
OFF: The zebra pattern disappears.
MOMENT: A zebra pattern appears and stays for
about five seconds.
!£
DISPLAY switch
Enables or disables the audio level indication when
using the DVW-700 series camcorder.
Location and Function of Parts
