Sony BRU-SF10, Operating Instructions Manual, Page: 12 / 40

Specifications
GB
12
VISCA RS-422 connector (connector plug,
9-pin)
Analog RGB/COMPONENT (D-sub 15-pin)
Using the VISCA RS-422 Connector
Plug
1
Insert a wire (AWG Nos. 28 to 18) into the desired
wire opening on the VISCA RS-422 connector
plug, and tighten the screw for that wire using a flat-
head screwdriver.
2
Insert the VISCA RS-422 connector plug into the
VISCA RS-422 connector.
To remove the connector plug
Grasp both ends of the VISCA RS-422 connector plug
and pull it out as shown in the illustration.
Notes
• In order to stabilize the voltage level of the signal,
connect both ends to GND.
• When the connections using the VISCA RS-422
connectors are made, the VISCA RS-232C connection
is not available.
• The maximum connection distance with the VISCA
RS-422 connection is approximately 1,200 m (3,937
feet).
Pin No. Function
1 RXD OUT-
2 RXD OUT+
3 TXD OUT-
4 TXD OUT+
5 GND
6 RXD IN-
7 RXD IN+
8 TXD IN-
9 TXD IN+
Pin
No. Function
At YPbPr
COMPONENT
setting At YPbPr
COMPONENT
setting (at VD) At RGB
setting (at
SYNC)
At RGB
setting (at
VD)
1 Pr-OUT Pr-OUT R-OUT R-OUT
2 Y-OUT Y-OUT G-OUT G-OUT
3 Pb-OUT Pb-OUT B-OUT B-OUT
4 GND GND GND GND
5 GND GND GND GND
6 GND GND GND GND
7 GND GND GND GND
8 GND GND GND GND
9 NC NC NC NC
10 GND GND GND GND
11 GND GND GND GND
12 NC NC NC NC
13 HD-OUT HD-OUT HD-OUT HD-OUT
14 Tri-level
SYNC-OUT Bi-level VD-
OUT Tri-level
SYNC-
OUT Bi-level
VD-OUT
15 NC NC NC NC
VISCA RS422
1 2 3 4 5 6 7 8 9
RGB/COMPONENT
Wire
Flat-head screwdriver
1
9
1
9