Expl
oring the
XM
B
™
a
nd T
V
Fea
tures
47
BRAVIA
®
Sync™ with Control for HDMI
The
BRAVIA
Sync function allows this unit to communicate with other Sony equipment
supporting the
Control for HDMI
function.
To connect Sony equipment with Control for HDMI
Use an HDMI cable that bears the HDMI logo for connection.
Line up the triangle on the head of the HDMI cable with the triangle on the label of the HDMI
input when connecting the HDMI cable.
Setting the Control for HDMI
The
Control for HDMI
function must be set up in order for the unit to communicate with other
Control for HDMI
enabled equipment.
To setup the unit’s
Control for HDMI
:
1
Select
Channels & Inputs
on the
Settings
menu.
2
Highlight
HDMI Settings
and press
.
3
Select
Control for HDMI
and set it to
On
.
To verify connected devices, select
Device List
from the
HDMI Settings
menu.
For other equipment, refer to its operating instructions.
Available options using Control for HDMI
The following operations are available after you connect the supported Sony equipment with
Control for HDMI
function to your unit:
• Automatically turn off the connected equipment when you turn off the unit.
• The connected equipment and unit are turned on by One-Touch-Play.
• Possible operations with
SYNC MENU
buttons, see page 23.
When a Sony A/V receiver with
BRAVIA
Sync is connected, the following additional operations
are possible:
• Turning on the A/V receiver when the unit is turned on.
• Automatically switching to the audio output of the A/V receiver’s attached speakers.
• Adjusting the volume and muting of the A/V receiver with the unit’s remote control.
