XBR-55/65X930D, 65X935D/937D, 75X940D
242
APPENDIX-2
How to disassemble HEAT SINK (BM1 board)
<NOTE>
HEAT SINK are already attached to the B board for service.
If you need to disassemble HEAT SINK from B board for repair,
Please cut
HOLDER,HS WS(MUF)
with tool (nippers) from B side of B board.
However, please do it carefully because some damage may be given
to the neighborhood parts or the B board itself.
When you re-assemble HEAT SINK,
Do not reuse HOLDER,HS WS. Should be replaced to new parts.
And
Potting operation is necessary
at the same time for re-assembly of HEAT SINK.
Please refer SBR "New Potting TIM Operation for board repair" for details.
nipper
HOLDER, (HS MUF)
4-549-188-01
HOLDER, HS WS (MUF)
4-548-743-01
Unhook HOLDER,(HS MUF)
Do not reuse HOLDER.
Should be replaced to new parts.
Push
55”/65”: HEAT SINK (MUFF CP)
75”: HEAT SINK (MUFF2_C)
FY16 New
HEAT SINK(MUFF2_C)
4-584-547-01
Fin Qty: 9
FY15 Carry
HEAT SINK(MUFF_C)
4-549-395-01
Fin Qty: 13
Ceramic FIN HEAT SINK has 2 types such as right photos.
The difference b/w FY16 New and FY15 Carry is
Fin Qty.
Size and Hole position is same.
You can use both Ceramic FIN HEAT SINK for an assembly of
QF75" BM1 board.
Summary of Contents for BRAVIA XBR-55X930D
