Sony BRAVIA KDL-55W900A, I-Manual

Page: 225 / 250

sources.
Certain programs on digital sources display a loss of
detail.
Less detail than usual or artifacts (small blocks, dots or pixelation) may
appear on the screen, due to the digital compression of the source content
used by certain digital broadcasts and DVDs. The degree of visible
artifacts depends on the clarity and resolution of the TV.
Photo images appear small on the screen.
Photo images may not be displayed in full screen depending on the
resolution or aspect ratio of the file.
Photo images or folders take time to display.
Depending on the image dimension, file size, and number of files in a
folder, some photo images or folders take time to display.
The first time a USB device is connected to the TV via USB cable, it may
take up to a couple of minutes for the photos to display.
You cannot find a connected “BRAVIA” Sync HDMI
device.
Check that your device is “BRAVIA” Sync-compatible.
Make sure that [Control for HDMI] is set up on “BRAVIA” Sync-compatible
device and [BRAVIA Sync Control] is set up on the TV.
You cannot control a second AV receiver.
Only one “BRAVIA” Sync-compatible AV receiver can be used.
The TV does not output picture and/or sound from the
MHL device.
Disconnect the MHL cable, then reconnect it. Or turn the MHL device off,
then turn on again and release the screen lock of the device.
List of Contents © 2013 Sony Corporation
Top of Page
225