Service Procedure for Panel, Board and Software Change / Upgrade(WW)
6
1. Replace the BA* board.
2. By using the USB memory, upgrade Software.
3. Confirm and specify the following from the Service menu:
a. Check and set Digital MENU 002 MODEL, 000 SEG.
*Operate [NVM Write (Mute + 0)] each setting.
b. Check and set Digital MENU 002 MODEL, 001 DEST.
*Operate [NVM Write (Mute + 0)] each setting.
c. Check and set Digital MENU 002 MODEL, 002 MODELNAME.
*Operate [NVM Write (Mute + 0)] each setting.
d. Check and set Digital MENU 002 MODEL, 003 SERIAL.
*Operate [Decision (12/Enter/Select)] after setting.
e. Set VPC MENU 000 DATA_COPY, 000 BU_TRANS.
f. Check Model ID, Product ID and Software Version from Digital MENU.
4. Conclude the operation.
1-1. Steps After Replacing the Service Board
Note: Before operation, disconnect all cables connected to the TV.
SEC.1 SERVICE BOARD
