52
If you missed the
Initial Setup
when you first connected the TV or if you want to scan all receivable
channels, select
Initial Setup
. Follow the instructions on the screen. Some settings such as
Picture
Adjustments
,
Sound Adjustments
, and
Parental Lock
will not be affected by this
Initial Setup
. If
you wish to return your TV to factory settings, please see the Troubleshooting section on page 56.
Home Menu Scrolling
Adjust the navigation speed through menu items.
Standard
Select to scroll quickly with
V
/
v
buttons.
Mode 1
Select to scroll slowly with
V
/
v
buttons.
Mode 2
Select to scroll individually with repeated
V
/
v
/
B
/
b
button press.
Power Saving
Reduces the power consumption by adjusting the backlight brightness. This also enhances
the black level. Select from
Off
,
Low
,
High
and
Picture Off
.
~
• While
Picture Off
is set, pressing
VOL +/–
or
MUTING
buttons will not disable this
function. Press other buttons to disable it.
Light Sensor
Enables the automatic picture (screen) brightness control. The
Light Sensor
measures
the room brightness which allows the TV to automatically adjust the backlight brightness
based on the picture settings and the ambient room light conditions.
~
• Be sure not to put anything around the sensor, as its function may be affected (see page 18).
• In low light the range of the backlight control is reduced when the
Light Sensor
is set
to
On
.
PC Power
Management
Select
On
to have the TV automatically enter standby mode when there is no signal input
for more than 30 seconds. The
STANDBY
LED on the front panel illuminates with the
On
option. Select
Off
to disable this feature.
~
• Press
POWER
to exit from standby mode.
•
PC Power Management
is not VESA-compliant.
Logo Illumination
Select
On
to illuminate the SONY logo on the front panel or select
Off
to disable this
function.
Picture Adjustments
Lock
Select
Lock
to prevent the picture adjustments from being changed. To disable this
feature and allow picture adjustments, select
Unlock
.
Initial Setup
~
•
Favorite
channel list will be cleared each time you run the
Initial Setup
.
