- 8 -
EG1L-L SELF DIAGNOSTIC SOFTWARE
The identification of errors within the EG1L-L chassis is triggered in one of two ways :- 1: Busy or 2: Device failure to respond to IIC. In the
event of one of these situations arising the software will first try to release the bus if busy (Failure to do so will report with a continuous
flashing LED) and then communicate with each device in turn to establish if a device is faulty. If a device is found to be faulty the relevant
device number will be displayed through the LED (Series of flashes which must be counted).
LED Error Codes and Descriptions
Number of LED
Flashes
Error Description
Micro
Checked
Action
02
DC_DET (12V main voltage).
VERD
In normal mode.
Goes into standby and LED flashes.
06
Panel Det error.
VERD
In normal mode.
Goes into standby and LED flashes.
07
Internal temperature error.
VERD
In normal mode.
Goes into standby and LED flashes.
08
Audio error (SP protection).
VERD
In normal mode.
Goes into standby and LED flashes.
10
Digital error.
VCT
In normal mode.
Adds error to error menu.
11
NVM error.
VCT
In initialisation state.
Adds error to error menu.
12
I2C error VCT.
VCT
In normal mode.
Adds error to error menu.
13
Balancer error.
VERD
In normal mode.
Goes into standby and LED flashes.
14
HDMI error.
VCT
In initialisation state.
Adds error to error menu.
15
Tuner Error
VCT
In initialisation state.
Adds error to error menu.
16
I2C CH1 (VERD TAS).
VERD
Factory mode.
LED error.
17
I2C CH0 (VERD NVM/RTC).
VERD
Factory mode.
LED error.
21
VCT error
VERD
In normal mode.
LED error.
22
MSP error.
VCT
In initialisation state.
Adds error to error menu.
