KDL-40NX725/46NX725
46
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
BATL (MAIN) BOARD REMOVAL
NOTES:
Refer to
“Handling the FFC Connector” on page 3
to disconnect the LVDS Connector.
The Sheet (BAT-L Metal Bottom) and Sheet (BAT-L Metal Side) are not included with the LCD Panel
and must be replaced when replacing the LCD Panel.
A Remove 6 screws and disconnect 6 connectors from BATL Board to detach from LCD Panel
“Handling the FFC Connector” on page 3
)
B Release 2 clips and slide-out Bottom Bracket to detach from BATL Board
C Release 2 clips and slide-out Side Bracket to detach from BATL Board
204
4-256-432-11
SHEET (BAT-L METAL BOTTOM)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
205
4-256-431-11
SHEET (BAT-L METAL SIDE)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
2-990-421-41
SCREW, (+PSW) (M3X6)
201
A-1818-429-A
BATL BOARD, COMPLETE
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL, YOU
MUST UPDATE THE SOFTWARE TO THE LATEST VERSION.
202
4-265-819-11
BRACKET BOTTOM (BAT-L METAL)
203
4-265-817-01
BRACKET SIDE (BAT-L METAL)
A
B
C
201
202
204
203
205