16
KDL-32XBR4/40D3000
KDL-32XBR4/40D3000
1-9. D1 BOARD AND G3 BOARD (POWER UNIT) REMOVAL (KDL-40D3000 ONLY)
1 Disconnect 5 connectors
2 Remove 4 screws, +PSW 3SG
3 Disconnect 4 connectors
4 Remove 4 screws, +PSW 3SG
1-9-1. REPLACING THE INVERTER CONNECTOR ASSEMBLY (KDL-40D3000 ONLY)
1
After inserting the connector
into the Inverter board,
push the middle section
of the inverter connector to
lock on the terminal.
Push the right section of
the inverter connector and
confirm it is securely
connected.
Push the left section of
the inverter connector and
confirm it is securely
connected.
2
3
Use the following procedure to confirm that the connector is securely attached to the In
4
1
3
2
D1 Board
G3 Board
G3 Bracket
