26
US
D:\SONY TV\SY16_QW_BR6_IM_E41\4584802E41_US\070MEN.fm
masterpage: Left
KDL-48W655D / 40W655D / 32W655D
4-584-802-
E4
(1)
Advanced Settings
Dynamic Range:
Compensates for
differences in the audio level
between different channels.
Note
• The effect may not function or may vary
depending on the program regardless of the
[Dynamic Range] setting.
Dolby Digital Plus Out:
Select [Auto] to
pass through Dolby Digital Plus
stream to ARC when Dolby Digital
Plus is available through connected
Audio System.
During Dolby Digital Plus stream is
output, Digital Audio Out (optical)* is
muted.
Select [Off] to convert Dolby Digital
Plus stream to Dolby Digital for both
ARC (Audio system) and Digital Audio
Out (optical)*.
HE-AAC Audio Level:
Adjust the HE-
AAC audio sound level.
MPEG Audio Level:
Adjusts the MPEG
audio sound level.
* Only on limited region/country/TV model.
Screen
Wide Mode
For details about wide mode, see page 19.
Auto Wide
Automatically changes the wide mode
according to the input signal from an
external equipment.
4:3 Default
Sets the default [Wide Mode] for a 4:3
input signal.
Auto Display Area
Select [On] to automatically adjusts the
display area based upon the content or
[Off] to choose from the [Display Area]
options.
Display Area
Adjusts the picture display area.
H Center
Adjusts the horizontal position of the
picture.
V Center
Adjusts the vertical position of the picture.
Vertical Size
Adjusts the vertical size of the picture
when [Wide Mode] is set to [Wide Zoom].
PC Settings
Adjust the picture size, see page 19.
Channel Setup & Ginga
Cable/Antenna
Cable:
Select if you are receiving cable
channels via Cable TV provider.
Antenna:
Select if you are using an
antenna.
Auto Program
Automatically sets up the channel list on
the TV for all receivable channels.
Select [Auto Program].
Select [OK] to automatically sets up the
channel list.
Add Digital Channels
Select [Add Digital Channels].
Select [OK] to add digital channels.
Show/Hide Channels
Allows you to show or hide channels that
appear when you use the
CH +/–
buttons.
Press
/
to scroll through the channels
until you find the channel you want to
show or hide. Then press
to select it.
Press
/
to determine if the channel will
be shown or hidden. Then press
to
select it.