AZ1 VERSIONUP PROCEDURE(EU)
24
1. When you turn on the set after replacing the Service Panel, the green LED and amber LED may blink if no image and sound are generated.
Even so, insert USB for upgrade into the USB slot on the set while the set is turned on.
2. After inserting USB, the green LED and amber LED blink for a while. The set is reset about minutes later, and then the Standby LED
lights and the Communication LED blinks.
Note: After replacing the Panel, the upgrade startup screen may not appear. In addition, be sure not to remove USB while it is writing.
3. After the writing is complete, the set is rebooted and the screen indicating the upgrade is complete is displayed. Then, remove USB from
the set and press the “Enter” button while the set is turned on.
Ex
trac
t
2-4. How to Upgrade the Version by Using USB
SERVICE PANEL
SERVICE PANEL
