AZ1 VERSIONUP PROCEDURE(EU)
22
PEM
SERVICE
001
DL
001
PRETENDED_ID
0
PEM Service menu
<To set PRETEND_ID in PEM>
1. Press the “2/5” key on the remote commander to select DL.
2. Press the “1/4” key on the remote commander to select PRETEND_ID.
3. Press the “3/6” key on the remote commander to select from 0 to 1.
Note: PRETENDED_ID can only be set in the PEM Model.
Press 2: increment
Press 5: decrement
Press 1: increment
Press 4: decrement
Press 3: increment
Press 6: decrement
Remote Commander
a
b
c
Note: In order to avoid inconsistencies in Software Versions between the
B board and TCON board, be sure to rewrite PRETEND_ID.
2-2. How to Change the PEM Settings
SERVICE PANEL
SERVICE PANEL
