Sony Bravia KDL-26U2000, Service Manual

Page: 25 / 90

- 25 -
SE-1
RM-ED007
Test Mode 2 is available by setting the TV for operation in Service Mode [ As shown on Page 23 ] , OSD ‘TT’ appears. The functions de-
scribed below are available by selecting the two numbers. To release the ‘Test mode 2’, press 00, 10, 20 ... twice or switch the TV set into
Stand-by mode. In ‘TT Menu’ mode, it is possible to remove the Menu from the screen by pressing the Speaker Off button once. Pressing the
Speaker OFF button a second time will cause the Menu to reappear. The function is kept even when the menu is not displayed on screen !!.
3-2. TEST MODE 2
00 'TT' mode off
01 Set picture level to maximum
02 Set picture level to minimum
03 Set volume to 35%
04 Set volume to 50%
05 Set volume to 65%
06 Set volume to 80%
07
Ageing mode on
08 Shipping Condition
16 Picture level 50%
19 Factory mode enable/disable
24 U Destination
25 AEP Destination
27 CBA mode toggle (ON/OFF)
31 ECS mode toggle (ON/OFF)
32
Set BCN channels preset
33 FILMODE toggle (ON/OFF)
34 Set INY channels preset
35 INSERT or SWAP sorting
37 Hotel mode
38
OTRUM mode
39 Enable Digital Test
41 Re-initialise NVM
43 Select Dual Sound A
44 Select Dual Sound B
45
Select Dual Sound Mono
46 Select Dual Sound Stereo
48 Set NVM as non-virgin
49
Set NVM as virgin
51 PAL autoadjustment
52 RGB autoadjustment
53 SECAM autoadjustment
54 Watchdog toggle
55 Toggle tuner selection
56 Reset all channel attenuations
58 Chip select toggle
59 Visual I2C toggle
61
Auto AGC
62 Toggle digital mode flag
63 AM from baseband or from RF
64 Set 40" settings
67 MSP Auto Carrier Mute function enable/disable
71
Set 19" settings (Not Applicable)
72 Set 23" settings (Not Applicable)
73 Set 26" settings
74
Set 32" settings
75 Set centred balance
76 Set volume to max
77 Set volume to min
78 Set balance full left
79
Set balance full right
81 Digital BER display
82 Digital Service menu
83 Digital colour bar output from DENC
84 TS CI path through
85 Digital tuner power down
86 Switch between two digital SW banks
87 Local keys test
88 Digital shipping conditions
89 LED test
92 PC Monitor mode
93 I2S / Analogue audio used for Digital sound
96 Digital debug output: enable/disable
97
Digital 656 output: enable/disable
98 Digital Auto Reset function: enable/disable
99 Display Error and Working Time menu