Sony Bravia KDL-26S40 Series, Operating Instructions Manual

Page: 12 / 181

12
GB
Watching TV
1
Press
1
on the TV to switch on the TV.
When the TV is in standby mode (the
1
(standby) indicator on the TV (front) is red),
press
"/1
on the remote to switch on the TV.
2
Press DIGITAL to switch to digital mode or
ANALOG to switch to analogue mode.
The channels available vary depending on the
mode.
3
Press the number buttons or
PROG +/-
to
select a TV channel.
To select channel numbers 10 and above using
the number buttons, enter the second and third
digits within two seconds.
To select a digital channel using the Digital
Electronic Programme Guide (EPG), see
page 14.
In digital mode
An information banner appears briefly. The
following icons may be indicated on the banner.
Additional operations
Watching TV
3
2
2
3
: Radio service
: Scrambled/Subscription service
: Multiple audio languages available
: Subtitles available
: Subtitles available for the hearing impaired
: Recommended minimum age for current
programme (from 4 to 18 years)
: Parental Lock
c
: Current programme is being recorded
To Do this
Turn on the TV
from Standby mode
without sound Press
%
. Press
2
+/- to set
the volume level.
Adjust the volume Press
2
+ (increase)/
- (decrease).
Access the
Programme index
table (in analogue
mode only) Press . To select an
analogue channel, press
F
/
f
,
then press .
010COV.book Page 12 Friday, July 4, 2008 1:13 PM