12
1
Connect your aerial to the socket on the
rear of the TV.
If connecting to an aerial only (
A
)
Connect the socket to the socket on the rear
of the TV with the supplied coaxial cable.
Go to step 3.
If connecting to a VCR with an aerial (
B
)
Go to step 2.
2
Connect your VCR.
1
Connect the socket on the rear of the TV to
the input socket on your VCR with the RF
lead.
2
Connect the output socket on your VCR to the
socket on the rear of the TV with the
supplied coaxial cable.
3
Connect the scart socket on your VCR to the
/
2 scart socket on the rear of the TV
with a scart lead.
Note
Do not connect the mains lead to your mains socket until
all connections are complete.
3
Bundle the cable.
4: Preventing the TV
from toppling over
Sony strongly recommends using the TV stand SU-
RG11S (for KDF-E42A12U)/SU-RG11M (for KDF-
E50A12U) with a support belt designed for your TV.
5: Switching on the TV
1
Connect the TV to your mains socket (220-
240V AC, 50Hz).
2
Press
1
on the TV (front side).
When you switch on the TV for the first time, the
message confirming the TV start auto-tuning
appears on the screen.
When the TV is in standby mode (the
1
(standby)
indicator on the front of the TV is red), press TV
+
/
1
on the remote to switch on the TV, then go to
page 13.
1
P U S H O P E N
W E G A G A
T E
T V /V ID E O
C A N N E L
VO L U M E
P OW E R
T IM E R
L A M PP OW E R /S T
A N D B Y
2