Sony BRAVIA 4-106-868-13(1), Operating Instructions Manual

Page: 44 / 55

44
GB
Programme
Sorting Removes any unwanted digital channels stored on the TV,
and changes the order of the digital channels stored on the
TV.
1
Press
F
/
f
to select the channel you want to remove or
move to a new position.
You can also select a channel by pressing the number
buttons to enter its three-digit channel number.
2
Remove or change the order of the digital channels as
follows:
To remove the digital channel
Press . After a confirmation message appears, press
G
to select “Yes”, then press .
To change the order of the digital channels
Press
g
, then press
F
/
f
to select the new position for the
channel and press
G
.
3
Press RETURN .
Digital Manual
Tuning Tunes the digital channels manually. This feature is available
when “Digital Auto Tuning” is set to “Antenna.”
1
Press the number button to select the channel number
you want to manually tune, then press
F
/
f
to tune the
channel.
2
When the available channels are found, press
F
/
f
to
select the channel you want to store, then press .
3
Press
F
/
f
to select the programme number where you
want to store the new channel, then press .
Repeat the above procedure to manually tune other channels.
Subtitle Set-up Subtitle Setting When “For Hard Of Hearing” is selected, some visual aids
may also be displayed with the subtitles (if TV channels
broadcast such information).
Subtitle
Language Allows you to select the language of the subtitles.
Audio Set-up Audio Type Switches to broadcast for the hearing impaired when “For
Hard Of Hearing” is selected.
Audio Language
Selects the language used for a programme. Some digital
channels may broadcast several audio languages for a
programme.
Audio
Description Provides audio description (narration) of visual information if
TV channels broadcast such information.
Mixing Level * Adjusts the TV main audio and Audio Description output
levels.
Dynamic Range Compensates for differences in the audio level between
different channels. Note that this function may have no effect
for some channels.
Optical Out
Selects the audio signal that is output from the DIGITAL
AUDIO OUT (OPTICAL) terminal on the rear of the TV. Set
to “Auto” when equipment compatible with Dolby Digital is
connected, and set to “PCM” when non-compatible
equipment is connected.
z
* This option is only available when “Audio Description” is set to “On.”
Radio Display Displays the screen wallpaper when you listen to a radio broadcast.
You can select the screen wallpaper colour, display a random colour or view a
slide show (page 26, 30).
To cancel the screen wallpaper display temporarily, press any button.