15
Connection example
Settings
HD CUTOUT Video System
An HD signal can be extracted from the 4K signal by installing
the optional SZC-2001/2001M/2001W HD CUTOUT Software
in the BPU4000.
The region that is cut out can be controlled using a mouse or
other device connected to the HD CUTOUT Controller.
For details about setup and operation, refer to the
SZC-2001/2001M/2001W User’s Guide.
The cut-out HD signal is output from SLOT1 and a 4K signal
can also be output simultaneously from SLOT2.
HD signals down-converted from the 4K signal can be output
from SLOT3, SLOT4, and the CCU.
Also, a wire frame indicating the cut-out region can be
displayed on the signal from SLOT3, SLOT4.
The HD CUTOUT function switches to OFF when HDR video
output is enabled.
12G/6G-SDI signal output is supported only from the SDI OUT
1 and SDI OUT 2 connectors of SLOT2.
12G/6G-SDI signal output is supported by products with serial
numbers 15001 to 29999, 35001 or later, and products that
have undergone a software and hardware upgrade.
For details, contact your Sony representative.
SDI
OUT 1
SDI
OUT 3
SDI
OUT 2
SDI
OUT 5
SDI
OUT 7
SDI
OUT 2
SDI
OUT 1
HD SDI
OUT
SDI
OUT 4
SDI
OUT 6
SDI
OUT 8
REMOTE
CAMERA
3G/HD SDI OUT
BPU
SDI-MONI
AUX
DC IN
AUDIO IN
INTERCOM
REMOTE
LINE
MIC
AES/EBU
+48V
OFF
TRACKER
DC OUT
RET CTRL
PUSH
PUSH
SDI OUT 8
SDI OUT 7
CCU
CAMERA
SDI OUT 6
SDI OUT 5
SDI OUT 4
SDI2
SDI1
OUT
IN
REFERENCE
REMOTE
SDI OUT 3
SDI OUT 2
SDI OUT 1
SLOT1
SLOT3
3G/HD
SDI OUT 1
SLOT2
SLOT4
HD SDI OUT
SDI OUT
SDI OUT 2
SDI OUT 3
SDI OUT 4
SDI OUT 5
SDI OUT 6
SDI OUT 8
SDI OUT 7
CA4000
BPU4000
Optical fiber cable
Switcher
(4K Quad-Link)
Sync signal input
Return video signal
Prompter signal, etc.
3G SDI/HD SDI
Monitor
External power supply
LINK-1 LINK-2
LINK-3
LINK-4
HD SDI Monitor
HD SDI Monitor
RCP-3000/1000 series
Remote Control Panel
Monitor
(4K Single-Link)
For details about assignment of BNC connectors, see “Relationship
between Connection Type and BNC Connector Assignment” (page 22).
Switcher
(4K Single-Link)
Monitor
(4K Quad-Link)
or
or
Device
Setting
Menu/Page
Item
Set value
BPU4000
Image format settings
CONFIGURATION/
<SYSTEM SETTINGS>
SYSTEM
FORMAT
RESOLUTION
4096×2160 (4K system)
1920×1080 (HD HFR
system)
FREQUENCY
Frame frequency
Video output connector
settings
CONFIGURATION/
<OUTPUT FORMAT>
Can also be set using the control panel.
SLOT1 to
SLOT4
Video output format of each
slot
CA4000
Prompter output
connector settings
MAINTENANCE/<SDI OUT>
SDI-MONI OUT
HD-PROMPT
Note
