20
iPod
For details on the compatibility of your iPod, see
“About iPod” on page 28 or visit the support site.
In these Operating Instructions, “iPod” is used as
a general reference for the iPod functions on the
iPod and iPhone, unless otherwise specified by
the text or illustrations.
Playing back iPod
Before connecting the iPod, turn down the
volume of the unit.
1
Connect the iPod to the USB
connector via the dock connector to
USB cable.
The iPod will turn on automatically, and the
display will appear on the iPod screen as
below.*
Tip
We recommend the RC-100IP USB cable (not
supplied) to connect the dock connector.
The tracks on the iPod start playing
automatically from the point last played.
If an iPod is already connected, to start
playback press
(SOURCE/OFF)
repeatedly
until “USB” appears. (“IPD” appears in the
display when iPod is recognized.)
*
In the case of an iPod touch or iPhone being
connected, or that the iPod was last played back
using passenger control, the logo will not appear on
the screen.
2
Press
(MODE)
to select the play mode.
The mode changes as follows:
RESUMING
t
ALBUM
t
TRACK
t
PODCAST
*
t
GENRE
t
PLAYLIST
t
ARTIST
*
May not appear depending on iPod setting.
3
Adjust the volume.
Press
(SOURCE/OFF)
for 1 second to stop
playback.
Removing the iPod
1
Stop the iPod playback.
2
Remove the iPod.
Caution for iPhone
When you connect an iPhone via USB, telephone
volume is controlled by iPhone itself. In order to avoid
sudden loud sound after a call, do not increase the
volume on the unit during a telephone call.
Notes
•
Do not detach the front panel during playback of the
iPod, otherwise data may be damaged.
•
This unit cannot recognize iPod via a USB hub.
Tips
•
When the ignition key is turned to the ACC position,
and the unit is on, the iPod will be recharged.
•
If the iPod is disconnected during playback, “NO
DEV” appears in the display of the unit.
Resuming mode
When the iPod is connected to the dock
connector, the mode of this unit changes to
resuming mode and playback starts in the mode
set by the iPod.
In resuming mode, the following buttons do not
function.
–
(3)
(REP)
–
(4)
(SHUF)
Display items
A
Source (iPod) indication
B
Track name, Artist name, Album name, Track
number/Elapsed playing time, Clock
To change display items
B
, press
(DSPL)
.
Tip
When album/podcast/genre/artist/playlist is changed,
its item number appears momentarily.
Note
Some letters stored in iPod may not be displayed
correctly.
Support site
http://support.sony-europe.com/
>
.
M
EN
U
