1-2 (E)
BKSR-2025/2035
BVTT
3
x
6
Slot label
BKSR-2025
1-2. Board Installation
1-2-1. BKSR-2025
General Information
.
The BKSR-2025 can be inserted into slots No.2 to No.5 of
VSR-2000A.
n
To attach multiple boards, attach them from the No.1
slot in order.
.
Stick the slot label supplied with the BKSR-2025 onto the
connector panel after the board installation to prevent the
incorrect insertion when the board replacing.
.
Do not open the slot to keep the air-cooled effect of VSR-
2000A. Be sure to attach the blank panel to vacant slot.
.
It is not necessary to adjust after board installation/re-
placement.
Procedures
1.
Turn off the power switch of the VSR-2000A.
2.
Remove the four screws, and remove the two blank pan-
els of any slot.
n
Keep the removed blank panel.
VSR-2000A (Rear side)
Slot No.1
3.
Insert the BKSR-2025 to the slot. Push the handle of the
board in the direction of installing, and insert it in the
mother board completely.
4.
Secure the BKSR-2025 with the four screws securing
the blank panel.
5.
Stick the slot label supplied with the BKSR-2025 onto
the connector panel.
The label’s number is the same as the slot number which
the board has inserted.
n
To remove the BKSR-2025, hold the handle of the board
and pull it in the direction of removing and remove the
board to the front.
VSR-2000A
BVTT
3
x
6
Blank panels
BKSR-2025
Installing
Removing
Handles
