3 (E)
Locations and Functions of Parts
1
SDI IN (SDI signal input) connector (BNC
type)
Accepts a 4:2:2 component serial digital video signal.
2
Active through-out connector (BNC type)
Supplies a signal which is input to the SDI IN
connector and whose waveform has been shaped.
3
REF IN (reference signal input) connector
(BNC type)
Accepts an analog black-burst signal as a reference
signal.
4
Loop-through output connector (BNC type)
Supplies a reference signal input to the REF IN
connector as-is.
If this connector is not used, connect a commonly
available 75-ohm terminator.
5
ANALOG OUT (analog signal output)
connectors (BNC type)
Each supplies an NTSC analog composite signal
obtained by converting the signal input to the SDI IN
connector.
Connectors 1 and 2 output the same signal.
6
SDI OUT (SDI signal output) connectors (BNC
type)
Each supplies a 4fsc NTSC composite serial digital
signal obtained by converting the signal input to the
SDI IN connector.
Connectors 1 to 4 output the same signal.
Connector Panel
ANALOG OUT
SDI IN
1
2
1
2
3
SDI
OUT
REF
IN
4
BKPF-012A
D12-ENC
1
SDI IN connector
2
Active through-out connector
3
REF IN connector
4
Loop-through output connector
5
ANALOG OUT connectors
6
SDI OUT connectors
