3(E)
Attaching the Battery Adaptor
These instructions give the steps for attaching the
battery adaptor to the CA-550/550P. The battery
adaptor can be attached by screws or by the supplied
attachment (supplied as an assembly).
Notes
• The back tally lamp is not visible when the battery
adaptor is attached to the CA-550/550P.
• When attaching the battery adaptor to the CA-57A/
57AP, a plate with screw holes for the CA-57A/57AP
is required (not supplied).
For more information, contact qualified Sony service
personnel.
Screwing the Battery Adaptor
Perform the following procedure to screw the battery
adaptor to the camera adaptor.
Note
This method cannot be used with the CA-55A/55AP.
1
Remove the caps from the
screw holes on the camera
adaptor rear surface.
2
Take out the hexagonal wrench
stored in the battery adaptor.
3
Screw the battery adaptor to
the camera adaptor using the
hexagonal wrench. Connect
the DC power cord to the DC
IN connector on the camera
adaptor.
4
Put the hexagonal wrench
back.
Camera adaptor
Caps
Hexagonal
wrench
Back side
To DC IN
DC power cord
Summary of Contents for BKP-L551
Page 20: ......
Page 28: ......
Page 36: ......
Page 38: ...BKP L551 WW 和 英 仏 独 3 856 980 03 1 Sony Corporation Printed in Japan 2008 02 13 1996 ...
