1-14(E)
DNE-1000
1-6-3. Rack Mounting
DNE-1000 can be mounted in a 19-inch standard rack. Be
sure to use an optional rack mount rail RMM-30.
<Required parts>
.
Rack mount rail (RMM-30)
Rails with brackets
: 2 pcs
Screws (B5
x
8)
: 8 pcs
.
Screws for rack mounting (RK5
x
16) : 4 pcs
.
Washers for rack mounting
: 4 pcs
(Sony part number: 2-297-913-01)
.
Screws (BVTT4
x
8)
(
*
1)
: 6 pcs
(
*
1): Included with DNE-1000.
n
1.
When DNE-1000 is mounted in a 19-inch standard
rack, it is recommended to attach a ventilation fan to
prevent a temperature rise in the rack because all units
in the rack are operated within the temperature range
of 10
d
C to 35
d
C.
2.
Be sure to use the recommended rail when rack
mounting. The unit cannot be completely attached to a
rack by rack angles alone.
3.
To prevent the unit fall when pulling it out from the
rack, be sure to fix the rack to the floor with bolts.
4.
An installation manual is included with the rack mount
rail RMM-30. The rack mounting procedures for
DNE-1000 differ from them in RMM-30’s installation
manual. Follow the procedures in this manual
5.
Be sure to mount the unit in the rack with two-person
or more.
6.
Be careful not to get caught your hand and finger in
the rack mount rail when attaching the unit in the rack.
Procedures
1.
Pull out the inner member while pressing the stopper
of the rack mount rail RMM-30.
2.
Secure the inner members to the unit by the six screws
(BVTT4
x
8) included with DNE-1000. (Fig.2)
1-6. Attachment of DNE-1000
Outer member
Stopper
inner member
BVTT4
x
8
BVTT4
x
8
DNE-1000
Inner member
Feet
Inner member