10
Preparations
To bring the cursor to the value you want to change
Rotate the MULTI CONTROL knob.
To change a value
Rotate the MULTI CONTROL knob while holding the
HOME button down.
For automatic assignment of network settings (such
as IP address)
Set the IP address to “000.000.000.000” or
“255.255.255.255.”
When the e-VTR is turned on, the network settings are
automatically assigned.
• If the IP address is set to “000.000.000.000” or “255.
255.255.255,” the IP address, subnet mask, and
default gateway are automatically assigned. In this
case, step
7
below is unnecessary.
• If automatic assingment is active, M51: SUBNET
MASK and M52: DEFAULT GATEWAY are not
displayed.
• For automatic assignment of network settings, a
DHCP server or a DHCP relay agent must be
installed on the same network as the e-VTR.
• If network settings are automatically assigned, the IP
address may change whenever the e-VTR is
restarted. To prevent this, the IP address for the
hardware address of the e-VTR should be defined in
advance on the DHCP server. The hardware address
can be confirmed on the Network Interface page
of the Web application.
6
When you have set the value, press the F5 (SET)
button.
The message “Save Complete” appears.
7
Set the subnet mask and default gateway in the manner
which is explained in steps
4
to
6
.
To set the subnet mask
Bring the cursor to M51: SUBNET MASK in step
4
.
To set the default gateway
Bring the cursor to M52: DEFAULT GATEWAY in
step
4
.
8
Restart the e-VTR, or operate M58: M50-M52
RENEW to apply the changes to the network settings.
Checking the state of the network
The network indicator lights or goes out as follows,
according to the state of the network.
Not lit:
No FTP connection
Lit:
FTP control connection
Blink:
FTP data connection
NETWORK button
Full access to the network is possible when the
NETWORK button is lit. When the NETWORK button is
not lit, limited network access is permitted for the
functions indicated below.
• Access via link layer (ping response, etc.)
• Web browsing
Notes
M5 : NETWORK
M50 : IP ADDRESS
192. 168. 0. 123
Save Complete
